EN
5
0 Preface
Validity
This document applies to:
•
Unit types ComfoSpot 50 series
These unit type series are hereinafter designated with the common product name, ComfoSpot 50.
The subject of this manual is the ComfoSpot 50 in its various design variants. Possible accessories are only described to
the extent necessary for appropriate operation of the unit. Please refer to the respective instructions for further information
on accessory parts.
Target group and standard operation
This manual is for users and qualified personnel. The activities are only allowed to be carried out by
appropriately trained personnel who are sufficiently qualified for the respective work involved.
Qualification
of target group
0.2.1.1 Users
Users must be instructed by qualified personnel as follows:
•
Instruction in hazards when handling electrical devices
•
Instruction in the system’s operation
•
Instruction in the maintenance of the ComfoSpot 50
•
Knowledge of and compliance with this manual, including all safety instructions.
0.2.1.2 Qualified
personnel
Qualified personnel must have the following qualifications:
•
Training in dealing with hazards and risks when installing and operating electrical devices
•
Training for the installation and commissioning of electrical devices
•
Knowledge of and compliance with the locally applicable building, safety and installation regulations of the relevant
local authorities or municipalities, the regulations of the water and electric utilities, and other official regulations and
guidelines
•
Knowledge of and compliance with this document, including all safety instructions
Unless otherwise stated in this manual, only a recognized qualified person is authorized to install, connect up, commission,
and to service the ComfoSpot 50.
Standard operation of the unit
This unit can be used by children aged 8 and over and also persons with reduced physical, sensory or mental abilities, or
a lack of experience and knowledge provided that they are under supervision or have been instructed on the safe use of
the unit and understand the risks that result from it. Children must not play with the unit. Children must not carry out cleaning
and user maintenance without supervision.
1
Introduction and safety
The ComfoSpot 50 is built to the current state of the art and the recognized safety regulations. The unit is subject to
continuous improvement and development. This is why it is possible for your unit to deviate slightly from the description.
Proper
use
Ventilation unit ComfoSpot 50
The ComfoSpot 50 can be used for comfortable ventilation in living and office areas (with limitations in the commercial
sector) at a normal room air humidity of approx. 40 – 70% RH, briefly up to approx. 80% RH. Any other type of use is
considered as misuse.
Extreme conditions (e.g. salty air or air polluted with chlorine) can damage the unit. For reasons of
safety, it is prohibited to modify the product or to install components that are not explicitly recommended or distributed by
Zehnder Group for this product.
Control
panels
The ventilation unit is equipped with an internal control panel. As an option, an external control panel can be connected to
the unit using a cable of max. 25 m length. The external control panel is only suitable for use in indoor areas.
Summary of Contents for ComfoSpot 50
Page 34: ...EN 34 Terminal scheme...
Page 39: ...EN 39 Product data sheet...
