background image

   1 - EN

    1 - EN

 

Preface

 Carefully read this manual before use.

   

This manual provides all the information required for safe 
and optimal installation and maintenance of the Com-
foAir 160. It is also intended as a reference  for servicing, 
so that this can be carried out in a responsible manner. 
The device is subject to continuous development and 
improvement. As a result, the ComfoAir 160 may slightly 
differ from the descriptions.

NOTE

This manual has been compiled with  

the utmost care. However, no rights can be 

derived from it. In addition, we at all times 

reserve the right to change the contents of 

this manual, without prior notice.

1  Introduction

The device's name is ComfoAir 160. In the following man-
ual it will be referred to as ComfoAir.
The ComfoAir is a balanced ventilation system with heat 
recovery in order to create healthy, balanced and ener-
gy-efficient  ventilation  in  houses.  The  ComfoAir  has  a 
CE marking on the identification plate. The identification 
plate can be found on top of the ComfoAir.

1.1   Warranty and liability

1.1.1   Guarantee conditions

The ComfoAir is covered by a manufacturer’s warranty 
for a period of 24 months after fitting up to a maximum 
of 30 months after the date of manufacture. Warranty 
claims may only be submitted for material faults and/or 
construction faults arising during the warranty period. In 
the case of a warranty claim, the ComfoAir must not be 
dismantled without written permission from the manu-
facturer. Spare parts are only covered by guarantee, if 
they were supplied by the manufacturer and have been 
installed by an approved installer.

The warranty becomes invalid if:

•   The guarantee period has elapsed;

• 

The device is used without filters;

• 

Parts are used that have not been supplied by the 
manufacturer;

• 

Non-authorised changes or modifications have been 
made to the unit.

1.1.2   Liability

The ComfoAir has been designed and manufactured for 
use in balanced ventilation systems incorporating Zeh-
nder heat recovery systems. Any other application is seen 
as inappropriate use and can result in damage to the 
ComfoAir or  personal injury, for which the manufacturer 
cannot be held liable. The manufacturer is not liable for 
any damage originating from:
•  Non-compliance with the safety, operating and main-

tenance instructions in this manual;

• 

The use of components not supplied or recommend-
ed by the manufacturer.

 

Responsibility for the use of such components lies 
entirely with the installer;

• 

Normal wear and tear.

Summary of Contents for ComfoAir 160





















Reviews: