Zehnder Rittling ComfoAir 160, User Manual

Page: 14 / 20

EN - 10
The user can only access P menus P1, P2 and
P9 to set additional programmes. The remain-
ing P menus (P3 to P8) are for use by the in-
staller only.
Accessing the P menus
1. Press " " and " " for two seconds simultane-
ously.
- Wait until "P 2" appears on the display.
2. Select the desired P sub-menu using "
" or "
", e.g., P menu “ 2 ".
3. Press " ".
4. Select the desired P sub-menu using " " or "
", e.g., P sub-menu " 23 ".
5. Press " ".
Entering settings in P menus
The minimum and maximum values for the
available parameters are preset in the software.
6. Select a new value for the programme using " "
or " ".
7. Press " " to store the settings.
8. Repeat steps 4 to 7 to set multiple parameters in
succession.
Or Press " " to return to the P menu so steps 2
to 7 can be repeated.
9. Press " " twice to return to the main screen.
Only in the P2 menus settings can be altered.
The other P-menus (P1 and P9) can only be
read.
Leaving Reading menu
• Press " " (instead of " ") at step 7.