2.9.8 When wiring has been completed apply cable clamp and retain the cable sheath securely in place by tightening
the cable clamp down with screw fixings.
2.9.9 Refit electrical cover, taking care gasket seal underneath is seated correctly and cable is not trapped.
13
1 2 3 4 5
1 2 3 4 5
Pre-wired
supply cord
not shown
Figure 8 - Securing BMS Wiring (Cable not supplied)
Pre-wired
supply cord
not shown
Figure 9 - Electrical Cover Attached (Cable not supplied)
