en42
+
➙
simultaneously
press for 3
seconds
Display of meter readings
➙
Display indication
Description
Number of operating hours of the pump.
Number of switch-on and switch-off processes of the pump.
Number of stops due to mains failure.
The maximum pressure to which the plant was exposed.
Enables the detection of pressure surges.
Total number of triggering processes of the alarm “motor
short-circuit”.
Total number of triggering processes of the alarm
“overcurrent”.
Total number of triggering processes of the alarm
“Power section over-temperature”.
Total number of triggering processes of the alarm “water
shortage” due to the digital input.
Standard display.
ZP SPEEDCONTROL COMFORT
en
English
6.7 Counter and alarm log
When pressing the buttons MENU +▲ for three seconds, you get to the memory in which
the meter readings and error messages are stored.
You can get to the next menu item in the counter and alarm log by pressing the button
The records will keep being available in the device if it disconnected from the mains!
