23
Basic Operation
Resetting the ZyPerMX4
The ZyPerMX4/MX2 can be reset to factory-default settings by clicking the
Default
button
under the
Device
tab or by pressing the
NAV / Control
button on the unit. (See next page
for details) When the ZyPerMX4 is reset to factory-default settings, the IP address will be
reset to will be set to
DHCP
mode.
► Using Maestro
1. Login to the Maestro web interface. See
The Maestro Web Interface (page 3)
for
more information.
2. Click the
Device
tab.
3. Click the
Default
button, under
Actions
.
4. The following dialog will be displayed, prompting to confirm the reset procedure.
5. Click the
Reset
button to reset the ZyPerMX4/MX2 to factory-default settings. Click
the
Cancel
button to return to the
Device
tab.
