background image

110

111

Commands

show device config

Displays device information for the specified device(s). 

Syntax

show device config

 id select [since]

Parameters

id

 

Type:  

STRING or MAC Address

 

 

 

The identifier of the device.  Either the full or portion of a string name or MAC 

 

address can be supplied. 

argument

Description

all

Displays configuration information for all available 

devices.

encoders

Only encoders are displayed.

decoders

Only decoders are displayed.

since

 

This parameter is optional and can be specified to display units based on 

 

the number of changes, using the 

lastChangeId

 value on each device. 

 

However, if used, a lastChangeId value must follow.  Supply the 

since 

 

argument before the providing the 

lastChangeId

 value. 

argument

Description

since

Required when using this parameter.

Advanced Operation

Example

show device capabilities myEnc1 since 20          

device(d8:80:39:9a:e6:d);

  device.CapabilitiesVersion; values=1

  device.streams-supported; values=video:video-scaled:analog-

audio:hdmi-downmix-audio

  device.stream-mode-settable; values=video:video-scaled:analog-

audio:hdmi-downmix-audio

  device.stream-mcast-settable; values=video:analog-audio:hdmi-

downmix-audio

  device.join-video; values=multiview:genlocked:fast-switched

  device.video-port; values=hdmi

  device.hdmi-status; values=link:hdcp:resolution:fps

  device.join-audio; values=analog:hdmi-downmix-audio

  device.hdmi-audio-source; values=analog:hdmi:hdmi-downmix

  device.analog-audio-source; values=none:analog:hdmi-downmix

  device.encoder-analog-audio-source; values=none:hdmi-downmix

  device.ir; values=device:server

  device.rs232; values=device:server

  device.video-wall; values=maxSize(5):bezelsSupported

  device.send-multicasts; values=settable

  device.ip-mode; values=dhcp:static

  device.ip-params; values=address:mask:gateway

  device.decoder-edid; values=save

  device.encoder-edid; values=save:load

  device.flash-leds; values=supported

  device.ethernet-management-port-mode; values=supported

  device.video-input-port; values=hdmi:display-port:auto

lastChangeIdMax(5072370);

Success

Related Commands 

show device status

show device config

Summary of Contents for ZyPer










































































Reviews: