96
97
Commands
Commands
set device video-port
Selects active input port for ZyPer4K units with multiple inputs
Syntax
set device
id video-port
arg
Parameters
id
Type:
STRING or MAC Address
The name or MAC address of the encoder. String names are case sensitive.
arg
Type:
STRING
Supply one of the following arguments.
argument
Description
hdmi
Use the HDMI input
display-port
Use the Display-Port input
hdsdi
Use the SDI input port
analog
Use the Analog input port
Example
set device myEncoder1 video-port display-port
Success
Related Commands
set device analog-audio mode
set device general name
set device ip
set device rs232
set device source-display iconImageName
set device source-display location
set device source-display manufacturer
set device source-display model
set device source-display serialNumber
set multiview
Assigns source to a position and size within a multiview display
Syntax
set multiview
id
window-number
wn
encoder-name
enc
position-x
posx
position-y
posy
size-x
sx
size-y
sy
layer
ly
Parameters
id
Type:
STRING
Name of previously created multiview. String names are case-sensitive.
wn
Type:
Integer
Window number within the multiview (1-9)
enc
Type:
STRING or MAC Address
The name or MAC address of the source encoder. String names are case
sensitive.
posx
Type:
Integer
X coordinate of multiview window. Upper left corner of window. (0-99)
posy
Type:
Integer
Y coordinate of multiview window. Upper left corner of window. (0-99)
sx
Type:
Integer
Size/Length of multiview window. As a percentage of X dimension.
sy
Type:
Integer
Size/Height of multiview window. As a percentage of Y dimension.
