- 5 -
Submenu organisation:
3D Ignition Map
- enable/disable 3D ignition map
Nr. of Points
- number of ignition curve points (from 4 to 15)
Curve 0-33%
- ignition curve from 0 to 33% TPS
Curve 66%
- ignition curve for 66% TPS
Curve 100%
- ignition curve for 100% TPS
Exit
- exit submenu
Important!
To avoid wrong processing, don't make unreasonable curve course.
Every time you make any changes to ignition curve, it is automatically saved to number
#0. Later you can save it to any other number #1, or #2.
Ignition Map Example:
5.2.
Change NUMBER OF IGNITION CURVE POINTS
Move to
Nr. of Points
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Select number of ignition points, with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
5.3.
Change PARAMETERS OF IGNITION CURVE POINT
Move to point you want to change, with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Change rev point with pressing
'
+
'
, or
'
-
'
(in 100 rpm steps) and press
'
ENTER
'
to
confirm.
Change advance angle of output 1 with pressing
'
+
'
, or
'
-
'
(in 0.1deg steps) and press
'
ENTER
'
to confirm.
Change advance angle of output 2 with pressing
'
+
'
, or
'
-
'
(in 0.1deg steps) and press
'
ENTER
'
to confirm.
