- 15 -
30.
PV CURVE SW
Enabling, or disabling PV curve switch for changing PV curves while riding.
Enter
Set PV
menu and move to
PV Curve SW
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
Enable, or disable
PV Curve
switch with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to
confirm.
31.
MONITORING
Connect
programmer
to
PDCI
and wait few seconds for activation of
programmer.
Fist
information displayed on the
programmer
is software version.
With
programmer
you can watch revs, calculated advance ignition angle, TPS
position...depends on setting in the menu.
Information!
You can connect, or disconnect
PDCI
unit from
programmer
any time you want,
without any harm. It is not important, if motor running, or not and if power supply is
connected, or not.
Important!
Do not use too much force when connecting, or disconnecting
programmer
unit!
32.
ERROR REPORTS
PVerr 1
– position sensor error, or servo motor disconnected
PVerr 2 –
servo motor error (short connection)
