- 4 -
5.
SET IGNITION MAP
(if TPS disabled)
Enter
Set Ign.
menu and move to
Set Ign. Map
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
You entered submenu for setting ignition map.
Submenu organisation:
Nr. of Points
- number of ignition curve points (from 4 to 15)
1)
- first ignition curve point
2)
- second ignition curve point
...
...
...
...
Exit
- exit submenu
Important!
To avoid wrong processing, don't make unreasonable curve course.
Every time you make any changes to ignition curve, it is automatically saved to position
#0. Later you can save it to any other position #1, or #2.
Curve Example:
5.1.
SET IGNITION MAP
(if TPS enabled)
Three ignition curves can be programmed for different TPS positions.
PDCI
does not
only switch between ignition curves, but also interpolate 3D map for all TPS positions
above 33%.
Enter
Set Ign.
menu and move to
Set Ign. Map
with pressing
'
+
'
, or
'
-
'
and press
'
ENTER
'
to confirm.
You entered submenu for setting ignition map.
