- 1 -
www.zeeltronic.com
[email protected]
updated 21.06.2008
program version: 000.180608
USER MANUAL
PCDI-11V
PROGRAMMABLE CDI IGNITION AND PV CONTROLLER
TECHNICAL DATA
Limit values:
- minimum revs
200 RPM
- maximum revs
20000 RPM
- minimum supply voltage
8 Volts
- maximum supply voltage
16 Volts
- max. supply voltage for 1 minute
35 Volts
- current draw
25 mAmp
- maximum continuous current for shift light output
1 Amp
- peak current for shift light output
5 Amp
Circuit is protected against reverse supply voltage (wrong connection).
Features:
- CDI charged from hi voltage charging coils (generator)
- programmable ignition map (3D interpolated)
- store and load function for 2 ignition maps
- one input for magnetic pickup
- TPS input (ignition map is 3D interpolated above TPS33%)
- external switch for changing ignition map while riding
- shift light output
- quick shift (shift kill)
- tachometer output
- advance/retard whole ignition curve
- three stage rev limit (retard timing, reduced spark, spark off)
- signal delay compensation
- timing calculation for every 1 RPM change (1000, 1002, .. , 9805, 9806, ...)
- programmable power valve actuation
- store and load function for 5 PV curves
- programmable PV deviation
- programmable max close and max open positions
- self PV test on power-up
- PV error detecting (position sensor failure, servo motor failure)
