6. Call Settings
39
6.7.1
SIP
•
Local SIP Port:
SIP listening UDP port.
•
Local RTP Port :
RTP UDP ports range.
•
DTMF Mode:
RFC2833?SIP INFO message, or in-bound mode.
•
Telephone Event:
the payload type of telephone event code.
•
Codecs: codecs supported :
g723, g729, ulaw, alaw. The default sequence is g711u, g711a,
g729, g723 seperated by comma.
6.7.2
Timer
•
Timer for Ringing:
how long wait for ringback after dialing out.
•
Timer for No Answer:
how long wait for the answer after dialing out and receiving ringback.
•
Timer for RTP Detection:
the default value is 180, the range is from 10 to 3600, count in
second.
6.7.3
AA
•
Dial Mode:
dial mode, includes Dial End String, Dial Timeout or Both.
•
Dial End String:
the default is #.
•
Dial Timeout:
expiration time of dialing, count in second.
•
Query IP:
how to get GS8's IP address, composed by 12 keys : 0-9, *, #, the default is "***",
see 3.1 Login.
•
Auth Enable:
if need authentication information when querying GS8's IP address. If yes, you
should set Auth Passward also. The default is 23646, see 3.1 Login.
6.7.4
FXO
•
Tone Zone:
ring character for local country or area (different country or area has different ring
frequency, length, or interval), GS8 provides 36 common ring solutions for your convenience.
•
CID TYPE:
coming call display type of FXO line: FSK, ETSI DTMF, India DTMF, Brazil DTMF.
You need to ensure the both
CID TYPE
are the same mode when GS8's FXO connects to the
peer. The receiving of CID caller number will be affected if not.