5. Line Settings
22
•
Password:
the password for register.
•
Register Expiration:
timeout after these seconds.
•
Home Domain:
domain's IP address.
•
NAT Traversal Mode:
three modes:
•
None:
no mode.
•
Port Forwarding:
port forwarding mode:
•
Pubilc Address:
set public IP address or domain and port, the IP and port are separated by
":".
•
Outbound:
the IP address and port of the Outbound proxy which is typically used in an
environment with a firewall/NAT for signals and media stream traverse firewall/NAT.
•
Outbound Proxy:
set IP address or domain and port for outbound proxy, the IP and port are
separated by ":".
Note:
The default port is 5060 if you set only IP address.
•
Max Connections:
maximal simultaneous call number supported.
•
Enable AA:
if enter AA (Auto Attendant ) when dial in via this line.
5.1.2.2
Unregister IP Line
Set these paramters when Register is"Disable":
•
Proxy:
the same as 5.1.2.1 IP Line
•
Phone Number:
the same as 5.1.2.1 IP Line
•
Username:
the same as 5.1.2.1 IP Line
•
Passward:
the same as 5.1.2.1 IP Line
•
Ping Interval:
for unregister IP Line, you may set Ping Interval to let system Ping it periodically
for its status. When the value is 0, the system does not Ping it and think it available for ever.
•
NAT Traversal Mode:
the same as 5.1.2.1 IP Line
•
Max Connections:
the same as 5.1.2.1 IP Line
•
Enable AA:
the same as 5.1.2.1 IP Line
Note:
If there is no callerID when call out via unregister IP Line, the default Caller ID is 1111.
5.1.3
Backup Settings
Set parameters for backup proxy for registered IP Line. All items are the same as the primary.