5. Line Settings
21
5.1
IP Line
Here supports two ways of IP Line Settings: register and unregister.
For register-type IP Line, you need to set proxy's address and port, register server's address and
port, user name and password, register expiration, NAT-traverse, home domain, and maximum
connections and AA switch.
For unregister-type (P2P) IP Line, you need to set the counterpart's address and port, the
maximum amount of calls, NAT-traverse, and AA switch etc.
5.1.1
IP Line List
•
ID:
the serial number of IP device, begins from 1.
Note:
This number may not be the greatest since it may belong to the one deleted before.
•
Description:
the description of this line. (for backup configuration, this item is the same as the
primary).
•
Phone Number:
the user name used when register.
•
Register:
enable or disable register server.
•
Proxy:
the IP address and port of the proxy.
•
AA:
enable or disable AA service.
5.1.2
Parameters Descriptions
•
Description:
the description of this device. (for backup setting, this item is the same as the
primary one)
5.1.2.1
Registered IP Line
You need to set these when Register is"Enable":
•
Registry Server:
the IP address and port of registry server.
Note:
The default port is 5060 if you set only IP address.
•
Proxy:
the IP address and port of the proxy.
Note:
The default port is 5060 if you set only IP address.
•
Phone Number:
the phone number of this line.
•
Username :
the user name for register