Zebex Z-6172, Programming Manual

Page: 87 / 103

Advanced 2D Imager 79
P
ROGRAMMING
G
UIDE
Maintenance
Cleaning the scan window is the only maintenance required. A dirty window may affect
canning accuracy.
Never use any abrasive material or solvents on the window. Do not spray water or other
cleaning liquids directly onto the window.
Remove dirt by wiping ge ly with a damp cloth or tissue moistened with water and/or
ammonia.
leshoot
Follow the table below for ways to switch interface when the cable is missing.
USB mode to RS232
mode USB mode to USB Virt
COM
232 to USB mode
s
nt
Troub
ual
RS
Z-3172
Default Multi-
interfaces Mode
already cover both
USB & R
2
interface
No pow r, (hold the
trigger, e-plug USB cable,
power on to scan mode
switch barcode commands
and working properly)
Default Multi-
interfaces Mode
already cover both USB
& RS-232 interfaces
S-23
s
e
r
Z-6172
decode, User can
directly scan RS232 trigger
power
Power On, No No power, (hold the
, re-plug USB cable,
on to scan mode
No power, (hold the
trigger, re-plug RS-232
cable, power on to scan
USB mode barcode
commands to switch
mode)
mode to switch
interfaces switch barcode commands
and working properly)