Zebex Z-6172, Programming Manual

Page: 10 / 103

Advanced 2D Imager 2
Interface Mode
Interface Switch
Your imaging barcode scanner supports USB virtual COM, USB-HID and RS232. The USB
cable supports both USB virtual COM and USB-HID modes. Please install the driver
before using USB Virtual COM.

To use USB Virtual COM for the first time, scan the USB Virtual COM
barcode below then install the driver.

To switch from USB Virtual Com to USB-HID mode after the virtual COM
driver is installed, scan the USB HID barcode below.

To switch from USB Virtual Com to USB-HID mode if the virtual COM driver
is not installed:
1.
Press and hold the trigger.
2. Unplug and re-plug the USB cable.
3. Scan the USB HID barcode below.

To switch to RS232, simply switch the cables and scan the RS232 barcode
below.
USB HID
(Default)
USB Virtual COM
RS-232