Zebex Z-6170, User Manual

Page: 9 / 28

4. Installing the Device
4.1 Using Suction Cup
The device is designed with a cupulate stand, and easily sucks to any smooth
surface without making any damage. It is most suggested to place on glass
surface for best and firmest suction result, or use the transparent self adhesive
mylar provided in package if your counter top is not 100% smooth.
To install the device, you need to:
1. Clean the counter top and make sure the surface is smooth and dry.
2. Adhesive the mylar on top of the counter (ignore this step if the counter top is
made with glass or very smooth).
3. Attached the cupula in position, and press down the device to squeeze out the
air in the suction cup. (shown in Figure 2)
4. Press down the lever to secure device on the surface. (shown in Figure 3 step

)
5. Raise the lever to release the suction cup from the surface. (shown in Figure 3
step

)
a. The mylar is 145mm in diameter self-adhesive for easy
attachment, when stick onto surface, be careful and
prevent bubble enters inside.
b. The suction cup uses the vacuum theory to hold on to the
surface. If the surface is not smooth or cupulate is
damaged or dirty, air could go into the suction cup and
the cupulate will lost its function.
Figure 2: Place cupula in position
and hold firmly with one hand.
Figure 3: Press down lever to
secure device
4