12 Controlling the Scanner from the POS System
The scanner can be controlled from the POS system via the RS-232C interface.
Controlling can be accomplished by transmitting the following single byte
commands to the scanner. The default settings of the commands are as follows:
ASCII Code
Function
Byte is Also Called:
0E Hex
enable (resumes disable)
Shift Out or <Ctrl-N>
0F Hex
disable
Shift In or <Ctrl-O>
05 Hex
power-up re-initialization
ENQ or <Ctrl-E>
12 Hex
sleep
DC2 <Ctrl-R>
14 Hex
wake up (resumes sleep)
DC4 <Ctrl-T>
When the scanner is disabled (unable to scan), the motor of the
scanner will stay on until the scanner goes into sleep mode.
16
Summary of Contents for Z-6170
Page 1: ......
Page 24: ...15 Dimension Unit mm inch 19...
Page 25: ...16 Reading Field 16 1 Depth of Field 16 2 Width of Field 20...
