Product Overview
Installation
LED Indication
This scanner is a gun type rugged barcode
CCD/Laser scanner with a state of the art scan
engine. Featuring a superb scanning speed and
able to withstand 1.5 meter drop, it is ideal for
manufacturing and logistic sectors.
Logo Plate
LED Indicator
Buzzer
Trigger
Cable Connector
Exit Window
Strap Hole
Package Contents
The package includes the following items:
Gun type CCD/Laser
scanner
Communication
cable
(Model depends on
customer needs)
Quick Reference
Guide
5V Power adapter
(Only for specific
RS-232 cables as
optional accessory.
Model depends on
electrical
requirements of your
geographic location)
1.
Connect the interface cable to the
scanner.
2.
Connect the cable to the terminal’s
communication port.
3.
Connect the power cord to the cable
connector if required.
4.
To verify operation, point the scanner at
a barcode and pull the trigger. You
should hear a single beep indicating that
the label has been scanner successfully.
Removing Cable
1.
Locate the small hole at the bottom of
the scanner.
2.
Use a metallic pin and insert into the
hole.
3.
Gently pull the strain-relief of the cable
once a faint “click” is heard.
LED Status
Indication
One blue
flash
A barcode has been
successfully decoded
Steady red
(optional for
specific models
only)
The scanner is in
programming mode
Beep Indication
Beep
Indication
One beep
A barcode has been
successfully decoded
Four
consequent
beeps
The scanner has passed
the self-test and is
operating properly
Two
consequent
beeps
This indicates that the
scanner is in
programming mode
Continuous
beep tone
This is a failure
indication. Return the
unit for repair
Scanning Barcodes
1.
Ensure all connections are secure.
2.
Press the trigger and aim at the barcode
as illustrated.
3.
When decoding is successful, the
scanner beeps and the LED indicates
blue.
Correct and incorrect aiming are shown below.
