P
ROGRAMMING
C
ARD
Introduction
This programming card contains only
frequently-used programming bar code labels
used to configure the scanners.
For detailed programming instructions and
safety notices please refer to “Programming
Guide for Handheld CCD/Laser Scanner.”
Important Notice
No warranty of any kind is made in regard to
this material, including, but not limited to,
implied warranties of merchantability or fitness
for any particular purpose. We are not liable for
any errors contained herein nor for incidental
or consequential damages in connection with
furnishing, performance or use of this material.
Specification or version may be subject to
change without notice. The actual specification
and version are based on the product
delivered.
Laser Safety
The laser scanner complies with safety
standard IEC 60825-1 for a Class I laser product.
It also complies with CDRH as applicable to a
Class IIa laser product.. Avoid long term staring
into direct laser light.
Getting Started
Once the scanner is connected, you must
program the scanner to match the interface it is
connected to before barcode data can be
transmitted.
Follow the procedures below to setup the
interface or other features.
1.
Scan the ”Start of Configuration” barcode.
2.
Scan the barcode of the desired feature.
Multiple features can be enabled/disabled
before scanning the
End of Configuration
barcode.
3.
Scan the ”End of Configuration” barcode.
*The default parameter values are framed.
Start of Configuration
All program setup
must start with
reading this label
End of Configuration
All program setup
must end with
reading this label to
save any changes
RESET
Reset (return to
factory default)
ABORT
Exit programming
mode with no update
SHOW VERSION
Display firmware
version
Scan the barcode of
the interface you want
to use
USB
RS-232
USB virtual COM
IBM PC/AT/PS/2
Keyboard emulation
Stand-alone
ard
Keybo
W
tion
rmware
quired)
and emula
(Special fi
may be re
Frequently Used Settings
RS-232 Settings
Baud Rate
19200
9600
800
y
4
Parit
Even
Odd
Mark
Space
None
Data
Bit
7
8
St
t
op Bi
1
2
Messa
tor
ge Termina
None
CR/L
F
CR
LF
H Tab
STX/ETX
USB/Keybo
et n
ard S ti gs
International Keyboard (AL Method)
T
rd
USA Keyboa
Capital Lock
On
Off
Message
Terminator
None
t
En er
H Tab
