19
Default Mode warning:
If the unit enters the water and no FO2
values have been set, the default mode
alarm will sound and the display will blink.
Remove the computer from the water
and set at least one MIX value to clear
default mode.
Demand Screens:
Hold A
•
(LEFT) key to alternately display the Demand A and
Demand B screens for 2 seconds each.
Demand A displays current FO2 setting,
User Safety Factor and entry time.
The display continues to show the PGT
graph, OLI graph, dive time and depth
alarm icons and dive/gage mode icon.
Demand B displays the temperature,
maximum depth and dive time.
The display continues to show the PGT
graph, OLI graph, dive time and depth
alarm icons and dive/gage mode icon.
Safety Stop state:
This shows recommended safety stop time when in Dive Mode. On a dive
below 33ft (9.9m), once the diver ascends to 20ft (6m) or less, this timer
appears in the top of the display. The safety stop information remains until
the 3 minutes have counted down or the depth is less than 4ft. If the user
does not follow this stop, the computer does not impose a penalty, as it
would with a Deco Stops violation.
Stop Time Remaining
Current Depth
Summary of Contents for N2iTion3
Page 1: ...N2iTion3 Dive Computer Owner s Manual...
Page 4: ...iv...
Page 6: ...vi...
Page 43: ...37...
