Zeagle N2iTion3, Owner'S Manual

Page: 16 / 44

10
Dive Set Mode and Gage Dive Set Mode
To enter Dive Set mode from Compass mode press the
B
(MODE) button
once.
Note: If the surface interval is less than 10 minutes the computer will not
enter gage mode.
In Set mode the following information is displayed:
Dive Set Mode
. Figure 3
NITROX Icon
User Safety Factor
Current PO
2
Dive Icon
Depth Alarm Dive Time Alarm
Maximum Depth of PO
2
Fraction of Oxygen
Do Not Fly Icon
Gage Dive Set Mode
. Figure 4
Gage Icon
Depth Alarm Dive Time Alarm
Do Not Fly Icon
Fraction of oxygen (FO2): setting range 21-99% •
Maximum depth of PO2: Based on the fraction of oxygen, this indicates •
the water depth where the PO2 (pressure of oxygen) reaches the set
PO2 limit for that mix (from 1.0 to 1.6). If the water depth rank exceeds
the maximum water depth for the PO2 limit, the no-decompression
limit displayed will show bars (‘---’).
User Safety Factor (USF): If the level is “0” the usual algorithm is used •
for dive calculations. When the level is changed to “1” or “2” the next
higher altitude setting is used.