13
Typical Management Scenario
This section describes the typical management of ZAC Access Point. By default, it is set to thin AP
mode (managed AP) which allows it to be managed by the ZAC Access Point in AC mode. The
following figure illustrates a ZAC wireless network.
When a thin AP mode joins a wired network, it will start to look for a ZAC Access Point in AC mode. If
the thin AP founds the AP controller on the network, it will send the registration request to the AP
controller. Once the registration is successfully made, the AP that acts as the AP controller will add
the thin AP to its management list and provides it configuration information.
