30
For Virtual Cont Thin AP mode, if you need to configure the wireless settings for the ZAC Access
Point especially SSID and encryption method, go to
Wireless Settings
> Wireless Networks
and click
on #1
Wireless
SSID for configuration. After the configuration is made, click
Save
to save the settings.
A dialog message will pop up to remind you changes will also apply to other managed Thin APs. Click
Apply
to apply the configuration immediately.
To make profile setting on the ZAC Access Point itself take effect, you need to reboot the AP in controller
mode as well. To reboot the ZAC Access Point, go to
Management
> Configuration File
and click the
Reboot
button. The reboot process will take about 50 seconds.
