background image

== CONFIDENTIAL (All right reserved by ZDC) == 

10

intensity of signal. Adjust the antenna from side to side from head to foot, observe the number
value of dBm at the same time. When the number value of dBm is the greatest, the antenna is in 
the best positions. 

Notice: Two kinds of expression methods that equipment has offered the intensity of 
signal to compare with intensity of signal, the intensity of signal than only generally 
consults the meaning, is subject to number value of the intensity of signal (dBm) while 
adjusting the antenna!

If wireless2 work In Point-to-Multipoint mode, then must test every chain. 

Notice: In the Point-to-Multipoint mode, central point input the distance from the 
central point to the farthest remote point, Each remote point input the real distance from 
the each remote point to the central point.

Technical support 

You can access the Web page: 

http://www.zcom.com.cn/chinese/download.asp?styleid=1

.

Upgrade latest version software to download, if meet difficulty and please contact our supplier in 
the course of installing and using the Access Point. 

Nanjing Z-com Wireless Co.,Ltd

Addr

˖

168 Longpan Zhong Road JiangSu Software

Park Suite#118

Postcode

˖

210002

Tele

˖

025-84661320

Fax

˖

025-84661313

Websites

˖

www.zcom.com.cn

E-Mail

˖

[email protected]

Summary of Contents for ZA-5000-D











Reviews: