background image

== CONFIDENTIAL (All right reserved by ZDC) == 

9

Warning: In the Bridge mode, Country/Region, Channel, Data Rate of devices must to 
be same, otherwise unable to setup wireless chain. 

Note: If you experience interference (shown by lost connections and/or slow data 
transfers) you may need to experiment with different channels to see which is the best
and wireless1 and wireless2 had better not set the same channel. 

6. Use Link test function and test wireless chain. 

Select MAC Address of wireless1 in Local MAC list, then input the parameters of Space 
Between AP, RF Cable Loss, Local Antenna Gain and Remote Antenna Gain, click “Apply” 
button, then click “Start” button, test wireless1 chain. 

Select MAC Address of wireless2 in Local MAC list, then select Remote MAC Address in 
Remote MAC list, input the parameters of Space Between AP, RF Cable Loss, Local Antenna 
Gain and Remote Antenna Gain, click “Apply” button, then click “Start” button, test wireless2 
chain.

Notice: In Bridge Mode, the value of Space Between AP should close to the real 
distance.

Warning: The value of Space Between AP must be input. 

View the intensity of signal, and adjust the positions and angles of the antenna according to the 

Summary of Contents for ZA-5000-D











Reviews: