63
64
MODEL
1
10
.
6V
12
.
5ms
FRAME
RATE
DOWN
-
T
10
:
00
Press the INCREASE or DECREASE
Press
the
CLEAR
key
to
reset
the
timer
key
to
start
or
stop
the
timer
Press
to
select
TIMER
Press
to
enter
Function
Mode
Press
the
CLEAR
key
to
reset
the
DOWN
-
T
to
10
:
00
minutes
Press
the
SELECT
key
to
access
INH
,
DOWN
-
T
or
STOP
-
W
Press the INCREASE or DECREASE
key to set the down timer
[
TIMER
]
MODEL
1
DOWN
-
T
00
:
00
SW
:
ADJUST
[
PROG
.
MIX1
]
Press
to
enter
PROG
MIX
Press
to
enter
Function
Mode
Press
to
return
value
to
default
RATE
:
0
%
SW
:
ON
0
%
THRO
THRO
ON
OFFSET
:
0
Press
to
adjust
mix
value
Press
to
highlight
OFFSET
switch in the desired direction that you wish to adjust the mix value. Press the
INCREASE or DECREASE keys to adjust the mix value.
Note: If a switch is assigned to the mix, that switch must be turned on to allow
mixing values to be changed.Moving the stick or switch in the opposite direction
will allow the mix value to be adjusted in the opposite direction.
◆
Assigning an Offset
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DOWN keys to select the desired PROG. MIX
screen (1–3).Press the SELECT key to highlight OFFSET.
Press the INCREASE or DECREASE key to select the desired offset value.
◆
Timer
T7AH-2400 provides a screen show timer.with three programmable Settings
INH：
Shielding-in this mode timer is closed
DOWN-T:
Countdown timer-decreasing order of default timer which allowed 10 seconds of
interval to 59 points 50 seconds was programming. When that time expires before
10 S, every 1 S have a sound, a total of 10 times.
STOP-W:
Stopwatch-a stopwatch function is a simple count timer, display up to 59 points 59]
seconds. When that time expires, the top 10 S. Every 1 s have a sound, a total of
10 times
When the countdown timer and stopwatch function is selected, the timer will
display in the main screen. The following button or switch is to start or stop the timer.
SW
:
ADJUST ADJUST button
FLTNOR Flight mode NORMAL ELE D/R Elevator double proportion
GEAR GEAR AUX2 AUX2 AILE D/R Aileron double proportion
RUDD D/R Direction listed the campaign of THROHOLD Throttle keep
CLEAR buttons
：
Used to reset timers to the default time or reset a stopwatch to 0-0
FLT12 Flight mode 1
、
2
◇
Access to the timer function
Press the DOWN and SELECT buttons simultaneously to enter the system mode.
In system mode, the use UP or DOWN keys to select the timer screen
According to the SELECT button to choose a stopwatch, countdown timer or stop
After choosing the countdown timer press INCREASE or DECREASE button to
change the programming in advance.
◇
Access the timer control buttons or switch function
Press the SELECT and the DOWN buttons simultaneously to enter the system mode
In system mode, to use UP or DOWN keys to select the TIMER screen.
Press the SELECT button to choose SW,,start or stop the timer buttons or switch
After choosing the SW and then to press INCREASE or DECREASE keys to
selector buttons or switch.
Server display
Server display screen is used as a useful tool when programming your remote
control. It shows the steering gear's moving and direction when different
programming function, the joystick or switch moves.
