45
46
◇
To Reset a Model
●
Press the DOWN and SELECT keys simultaneously, then turn on the transmitter.
●
Press the UP key until MODEL RESET appears on screen.
●
Press the SELECT key until DATA RESET is highlighted.
●
Pressing the CLEAR key will reset the model memory to factory default settings.
◇
To Reset the Integrated Timer
●
Press the DOWN and SELECT keys simultaneously, then turn on the transmitter.
●
Press the UP key until the MODEL RESET function appears on screen.
●
Press the SELECT key until INTEg-T is highlighted.
●
Pressing the CLEAR key will reset the INTEG-T to factory zero.
◆
Enhanced wireless Trainer
The T7AH-2400 offers a Wireless Trainer Function. Premise is the transmitter's
and transmitter's sets are the same.
To Enter the Trainer Mode:
Press the DOWN and SELECT keys simultaneously, then turn on the transmitter.
Press the UP key until TRAINER function appears on screen.
Press the INCREASE or DECREASE key to activate or close Trainer function, then
TRAINER TRIM only used as a trainer switches.
◆
Throttle Recovery
The T7AH-2400 has a unique throttle trim recovery feature. Throttle Recovery
stores the last known throttle trim position once throttle restore function is
activated. That stored position is then recalled by moving the throttle trim up
(open) one notch when the throttle trim is moved to the full down (closed) position.
This makes shutting off the engine and restarting it with the correct trim position easy.
To Activate the Throttle Recovery Function
Press the DOWN and SELECT keys simultaneously, then turn on the transmitter.
Press the UP key until THRO RECOVERY appears on screen.
Press the INCREASE or DECREASE key to turn on/off the Throttle Recovery function.
◇
To Activate the Throttle Recovery Function
Press the DOWN and SELECT keys simultaneously, then turn on the transmitter.
Press the UP key until THRO RECOVERY appears on screen.
Press the INCREASE or DECREASE key to turn on/off the Throttle Recovery function.
[
MODEL
RESET
]
MODEL
1
ACRO
DATA
R
ESET
INTEG
-
T
Press
to
enter MODEL
RESET
Hold
while
turning
on
transmitter
Press
to
select
RESET
or
INTEG
-
T
Press
to
reset
data
or
timer
00
:
00
:
34
[
MODEL
RESET
]
MODEL
1
ACRO
DATA
R
ESET
INTEG
-
T
Press
to
enter MODEL
RESET
Hold
while
turning
on
transmitter
Press
to
select
RESET
or
INTEG
-
T
Press
to
reset
data
or
timer
00
:
00
:
34
INCREASE
and
DECREASE
key
INCREASE
and
DECREASE
key
Press
to
enter
function
main
screen
Press
to
enter
COPY
screen
Press
to
copy
selected
model
INH
TRAIN
RECOVERY
[ ]
Press
to
enter
THROTTLE
RECOVERY
◆
Pole mode
The T7AH-2400 have in four different control rod "mode" (0, 1, 2, 3). Different
mode corresponding to operation function of different control rod. Usually, set in
"mode" 1.
