Solo documento principale.
9/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
Operation
Do not use the product if it has any defects, cracks, scratches or leaks, but contact your dealer or ZCS
technical service.
Contact with the electrical grid or the terminal of the equipment
may cause electrocution or fire!
•
Do not touch the terminal or the conductor connected to the
electrical grid.
•
Follow all the instructions and safety requirements relating to grid
connection
Danger
If the system is not functioning properly:
•
Disconnect the input and output power supply
Warning
Maintenance and repair
Keep the system clean and dry; if you need to clean it, use a clean dry cloth.
1.2.
Symbols and icons
Introduces the main safety symbols on the Connext system.
Some safety-related symbols are located
on the device. Before installation, it is important to read and understand the contents of the symbols.
Complies with the European Directives (CE)
Class II equipment
Table 1
–
Symbols on the System
’
Smin"“’"
There is residual voltage in the inverter! Before opening the equipment,
wait five minutes to ensure that the capacitance has been completely
discharged.
Be careful of high voltage.
Be careful of high temperature.
Complies with European standards.
Ground connection point.
This indicates the allowed temperature range.
