Solo documento principale.
14/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
3-pin terminal block
Figure 7 - 3-pin terminal block
The 3-pin terminal block has the following pin-out.
Pin
Connection
L
Line connection
Earth connection
N
Neutral connection
Table 3
–
3-pin terminal block pin-out
The maximum acceptable cable cross-section for the terminals is 1.5mm
2
.
SD card slot
The “push
-
push” SD card slot allows the use of a microSD card with maximum capacity of 8 GB. The
card is inserted and removed by simply pushing the card in. The microSD card is not on board the
device and is only required for specific applications, as specified by ZCS Technical Support.
Ethernet connector
The Ethernet connector with two LEDs enables network connection via cable. All Connext devices
are already set-up for connection either via the on-board SIM or via cable.
