30
Basic System Settings
For users who use the IEEE 802.11n Wireless Access Point for the first time, it is recommended that
you begin configuration from “
Basic Settings
” in “
System
” shown below:
Figure 5 Basic System Settings
Device Name
: Specify the device name, which is composed of no more than 15 characters with
(0-9), (A-Z), (a-z) or (-).
Country Region
: For FCC domain, default country is United States only.
Network Settings
The Network Settings allows you to change network, IP address and configure few network
parameters like spanning tree and management VLAN ID. Make configuration in “
Network Settings
”
from “
System
”.
