Zcom AS220V2 User Manual Download Page 65

Page: 65 / 71

AS220V2

2x2 Dual Band 802.11ac Wave 2 Indoor Access Point

User Manual

Page 65

Parameter

Description

the space provided.

The following parameters are available in this section:

Parameter

Description

Restrict to address family

Select the IP address family that will be restricted here. Options to

choose from are IPv4 and IPv6, IPv4 only, and IPv6 only.

Restrict Masquerading to

given source subnets

To restrict the masquerading function to a given source subnet, enter

the IPv4 subnet of the source here. This option is not available for the

IPv6 address family.

More than one entry can be created.

Restrict Masquerading to

given destination subnets

To restrict the masquerading function to a given destination subnet,

enter the IPv4 subnet of the destination here. This option is not

available for the IPv6 address family.

More than one entry can be created.

Force connection tracking Select this option to force connection tracking.

Enable logging on this

zone

Select this option enable logging on this firewall zone.

Limit log messages

To limit log messages, enter the time limit here.

The following parameters are available in this section:

Parameter

Description

Allow forward to

Select the destination zone here. Traffic is forwarded to this zone

Summary of Contents for AS220V2








































































Search results

Summary of Contents for AS220V2

Reviews:

Related manuals for AS220V2

Brands by name

Popular brands

Zcom AS220V2, User Manual

Search results

Summary of Contents for AS220V2

Reviews:

Related manuals for AS220V2

Brands by name

Popular brands