AS220V2
2x2 Dual Band 802.11ac Wave 2 Indoor Access Point
User Manual
Page 31
The following parameters are available in this section:
Parameter
Description
Status
Displays basic status information of the interface.
•
Port - Displays the interface name. For example, "eth0.2".
•
RX - Displays the RX (receiving) data rate through the interface.
•
TX - Displays the TX (transmitting) data rate through the
interface.
Protocol support is not
installed
Click the Install package button to install the package needed for this
protocol.
VPN Server
Enter the IP address or domain name of the VPN server here.
PAP/CHAP
username/password
Enter the PAP/CHAP username/password for the PPTP account here.
The following parameters are available in this section:
Parameter
Description
Bring up on boot
Select this option to bring up this interface when the device
rebooted.
Use default gateway
Select this option to use the DHCP assigned default gateway on this
interface.
Use gateway metric
Enter the metric for the gateway here.
Use DNS servers advertised
by peer
Select this option to use the DHCP assigned DNS server addresses on
this interface.
Use custom DNS servers
Enter the IP address or domain name for a custom DNS server here.
More than one entry can be created.
LCP echo failure threshold The peer will be presumed to be dead after the given amount of LCP
Summary of Contents for AS220V2
Page 1: ......
