background image

zBOOST® YX545 SOHO USER GUIDE

ii

zBOOST® YX545 SOHO USER GUIDE

iii

Cet appareillage numérique de la classe [B] répond à toutes les exigences de l’interférence canadienne 
causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif 
peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle interférence reçue, 
y compris l’interférence qui peut causer l’opération peu désirée.

Le fabricant nominale de la puissance de sortie de ce matériel est simple transporteur. Pour les situations 
lorsque plusieurs signauxporteurs sont présents, l’évaluation devrait être réduite de 3.5 dB, en particulier 
lorsque le signal de sortie est ré-émise et peut provoquer des interférences adjacentes à la bande utilisateurs. 
Ce pouvoir est de la réduction par le biais de la sortie d’alimentation ou la réduction de gain et non par un 
atténuateur à la sortie du dispositif.

Please note: Th

  is unit has been approved for use in Canada under RSS 131, however, consent for the use of 

this device to improve cellular or PCS coverage, must be obtained through your cellular or PCS provider, 
prior to placing the unit in operation. Please refer to the Industry Canada document CPC 2-1-05, Section 
6.1 available or viewable at: 
http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf08942e.html

Copyright Notice

Th

  is manual is copyrighted. All rights reserved. Th

  is manual, whole or in part, may not be copied, 

photocopied, reproduced, translated or reduced to any electronic medium or machine readable form for 
distribution. Th

  is manual whole or in part, may not be modifi ed without prior consent, in writing, from 

Wireless Extenders.

Copyright © 2010 by Wireless Extenders, Inc.

Trademarks

Wireless Extenders, Wi-Ex, the Wi-Ex logo, zBoost, the zBoost logo and Extending Cell Zones are registered 
trademarks of Wireless Extenders, Inc.

Safety Guidelines

In accordance with FCC requirements of human exposure to radiofrequency fi elds, the radiating element 
(antenna) shall be positioned such that a minimum separation distance of 8 inches (20cm) is maintained 
between the radiating element and the user and/or general population.

Limited Liability

In no event shall Wireless Extenders be liable for any direct, indirect, special, punitive, incidental, 
exemplary or consequential damages, or any damages, whether in an action under contract, negligence, 
or any other theory, arising out of or in connection with the set up of, use of, inability to use, or 
performance of the information, services, products, and materials available from this manual. Th

 ese 

limitations shall apply notwithstanding any failure of essential purpose of any limited remedy. Because 
some jurisdictions do not allow limitations on how long an implied warranty last, or the exclusion or 
limitation of liability for consequential or incidental damages, the above limitations may not apply to you.
For full warranty guidelines, see page 15.

Safety and Product Warranty Information

Changes or modifi cations not expressly approved by 
Wi-Ex® could void the user’s authority to operate this 
equipment and/or void the product warranty.

Package Contents: zBoost® YX545 SOHO

Before you begin, make sure all of the following parts came with your zBoost® YX545.

Literature Contents: 

 Set-up overview for zBoost® YX545 SOHO

(User Guide online only)

Product Contents:

 zBoost® Base Unit

 zBoost

®

 Base Unit Antenna

 Power Supply

⑤ 

RG-59 (mini) Coax Cable 50 ft

.

 Signal Antenna

 Signal Antenna Mounting Hardware

Note

Summary of Contents for SOHO YX545













Reviews: