background image

zBOOST® YX545 SOHO USER GUIDE

12

zBOOST® YX545 SOHO USER GUIDE

13

Solid GREEN

Normal condition at power up

.

Slowly Alternating RED and GREEN

zBoost® is working, but at reduced 
performance and coverage due to “non-
ideal” setup. 

Solution: 

Increase the distance 

between antenna and amplifi er to 
achieve maximum performance and 
coverage.

Fast Flashing RED

Indicates insuffi

  cient distance between 

the antenna and the amplifi er. Th

 e 

amplifi er is operating at signifi cantly 
reduced coverage.

Solution:

 Increase space between base 

unit and antenna.

Solid RED

System is receiving signals from either 
the mobile device or the base station 
transceiver which are too strong for 
proper operation.

Solutions:

 

 Move away from 

receiving antenna with your cell phone. 

 Move antenna away from other 

devices..

Fast Alternating RED and GREEN 
followed by no light

Th

 e amplifi er is disabled.

Solution:

 Unplug and start over.

zBoost® Base Unit Light Indicators

At Initial Power Up Only

Solid GREEN

Normal condition.

Solid RED

System is receiving signals from either 
the mobile device or the base station 
transceiver which are too strong for 
proper operation. 

Solution:

 Please unplug your system. 

Re-orient your Signal Antenna and/or 
Base Unit to reduce the excessive signal 
source. Plug your system back in. If 
still solid red, call customer support 
1-800-871-1612.

After Initial Power Up

Technical Specifi cations

Product Specifi cations for zBoost® YX545 SOHO – Dual Band

PCS band

Frequency  

Uplink: 1850 to 1910 MHz  
Downlink: 1930 to 1990 MHz

System Gain

60dB

PCS band supported

A, D, B, E, F, C

Networks

CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, 
UMTS, HSPA, 3G

Cellular band

Frequency  

Uplink: 824 to 849 MHz  
Downlink: 869 to 894 MHz

System Gain

60dB

CEL band supported

A, B, A’, B’

Networks

CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, 
UMTS, HSPA, 3G

General

Power Consumption – Power Supply Current

3W standby; 7W max signal - 5.0VDC, 2.0A 
Max

Wall Supply Input ; Voltage

100-240VAC, 50-60 Hz

System Certifi cations

FCC Parts 15 & 24 (PCS), Parts 15 & 22 
(CEL), Industry Canada

Base Unit Size and Weight

5” x 7” x 1.25” – 9 oz.

Operating Conditions 

Indoor Use Only (40° - 105° F)

Th

  is product uses patented technology to protect the carrier network

Th

  is product is covered by patent US 7,706,744.  Other U.S. 

and foreign patents pending.

Summary of Contents for SOHO YX545













Reviews: