Zaxcom URX50, User Manual, Page: 9 / 27

Zaxcom URX50 Main Menu
9
Main Menu
Navigating the Main Menu
•
To enter the main menu - press the MENU key.
•
To advance to the next menu press the MENU key again.
Frequency Select
The frequency select menu is where the URX50 receive frequency is set. This frequency needs to match the
frequency that is set on the corresponding transmitter. To adjust the frequency, press the channel up key to
increase the frequency and press the channel down key to decrease the frequency. When enabled, the URX will
also scroll through its preset frequencies from this menu.
The frequency menu will display the modulation format, the name of the transmitter being received, a RF signal
strength meter, audio meter and an arrow showing which antenna the signal is being received on.
Lock Screen
6
When the lock screen is landed on a 5 second countdown clock will start. After 5 seconds elapse the URX50 will
lock and the menus cannot be accessed, this is to prevent the URX settings from accidentally be changed.
When the URX50 is locked the volume adjust keys, the channel preset keys and the time code display key can
still be used.
To exit the lock screen, hold the MENU key and press the CH UP key 4 times.
FREQ: 570.0
STEREO ‘TX NAME’
LOCKING IN 4
FREQ: 570.0
STEREO ‘TX NAME’