Zaxcom URX50, User Manual, Page: 10 / 27

Zaxcom URX50 Menu Navigation
10
Sub Menus
Menu groups
The URX50 has four sub menu groups
•
Channel Preset - Sets the number of preset channels and sets the frequency of each preset channel.
•
Scan - This is where the URX50 can scan the set RF spectrum.
•
Audio - This is where the audio functions of the URX50 are set.
•
Setup - This is where the setup parameters of the URX50 is set.
Accessing and navigating the menu groups
From in the main menu press the POWER / TC key three times quickly to access the menu groups. Then
pressing the CH UP or CH DOWN key will cycle between the menu items.
Entering and navigating a sub menu
When landing on the desired menu group press the MENU key to enter that menu. Pressing the MENU key
again will cycle through the menu items.
To return to the top of the menu press the MENU key to cycle to the top or press and hold the MENU key for
1.5 seconds.
Exiting the extended menu
To exit the menus, press the POWER / TC key 3 times quickly to return to the main menu.