Zaxcom URX50, User Manual, Page: 15 / 27

Zaxcom URX50 Headphone Routing Menu
15
Lanyard Keys
When using a headphone with a built -in volume control switches can be disabled from this menu.
1KHZ Notch
When turned on the 1Kilohertz filter will notch out audio at the 1KHz frequency, this way if someone is
monitoring audio and a tone is sent the listener will not hear it.
Volume Beeps
•
ON - There will be a beep tone in the headphone out when adjusting the headphone volume.
•
OFF - The headphone volume beeps will be muted.
Mute If Unit Code
This menu sets if transmitters with certain ZaxNet unit codes will not be able to be monitored by the URX50.
For example, if this menu is set to 30 any transmitter with a ZaxNet unit code below 30 will not be able to be
monitored by the URX50.
If a muted preset is selected to be monitored “MUTE” will appear on the display and that preset will not be able
to be listened to - even if that preset is enabled.
LANYARD KEYS:
ENABLED
1KHZ NOTCH:
OFF
VOLUME BEEPS:
OFF
MUTE IF UNIT CODE
(NEVER MUTE)
MUTE IF UNIT CODE
IS LESS THAN 2