Zaxcom URX50, User Manual, Page: 17 / 27

Zaxcom URX50 Set Up Menu
17
Software Update
This is where the URX software is updated from.
When in this menu pressing the CH UP key will initiate the update process and the URX50 will wait and search
for software that will be transmitted from a Zaxcom transmitter (please refer to the software update section of
this manual for more information on how to update the URX) .
Display Flip
The display flip menu changes the orientation of the display. Please note when the display is flipped the CH UP
and CH DOWN keys are flipped as well.
Battery Type
The battery chemistry that is being used in the URX50 is selected in this menu. Lithium, NIMH or Alkaline can be
selected.
Scan on boot
•
ON - When the URX boots up it will look for and if necessary, scan for the data channel being sent from the
Zaxcom GUI Bridge via a Zaxcom TRXCL3 camera link transmitter.
When the URX boots up it will look for data from the TRXCL3’s on preset number 1 if the URX does not find
the data it will initiate a scan to search for the data.
For the URX to automatically find the data from the TRXCL3 the UNIT ID code on the camera link needs to be
set to 99 and transmit frequency needs to be set to a whole MHz frequency (for example any frequency like
550.00 MHz or 551.000 MHz will work - a frequency like 550.100 MHz will not work). Then after the data is
received the URX will automatically go back to the frequency it was originally set at.
•
OFF - The URX will boot up as normal. If the data is present on the frequency it booted up to it will take the
data if no data is present the URX will continue to operate as normal.
PRESS TO
UPDATE SOFTWARE
DISPLAY FLIP:
OFF
BATTERY TYPE:
LITHIUM
SCAN ON BOOT:
ON