Zaxcom Nomad User’s Manual_____________________________________________________Chapter 7
69
Chapter 7
– Connector Pinouts
This section provides the pinouts for the connectors on the Nomad. The mating cable connector part number is
also provided for the less common connectors.
NOTE:
All of the diagrams in this chapter show the solder side of each connector.
Audio Input / Output Connectors (XLR-3)
When building an analog cable, use balanced XLR cable.
3 3
1 2 2 1
Figure 7-1 XLR-3M (Left) and XLR-3F (Right) Pin Numbering
Pin
Description
Pin
Description
Pin
Description
1
Ground
(
X
– shield)
2
(+) / Hot
(
L
– live)
3
(
–
) / Cold
(
R
– return)
Table 7-1 XLR-3 Pin Description
Power Connector (Hirose-4 Connector)
Pin
DESC
Pin
DESC
1
(
–
) / Cold
2
N/C
3
N/C
4
(+) / Hot
Table 7-2 Hirose-4 Pin Description
Audio Input / Output Connectors (TA-5)
Pin
DESC
Pin
DESC
1
Ground
2
Channel A +
3
Channel A -
4
Channel B +
5
Channel B -
Table 7-3 TA-5F & TA-5M Pin Description
Mono & Tape Output Connectors (1/8” TRS)
Pin
Description
Pin
Description
Pin
Description
Tip
+
Ring
N/C
Sleeve
Ground
Table 7-4 Mono & Tape Output Pin Description
NOTE:
Since the ring connector is not being used, you can use a TS plug.
