Zaxcom Nomad, User Manual

Page: 23 / 74

Zaxcom Nomad User’s Manual_____________________________________________________Chapter 2
23
Home page
Page purpose: This page displays the current status for the recorder and its major components.
How to get here:
Turn the power on and let the system initialize.
Figure 2-2 Home page (ENG Home page selected)
Page Notes
Once the boot process has completed, one of the configurations shown in Figure 2-3 { p.25 } is displayed.
Transport Status field
( Figure 2-2 { p.23 } displays STOP )
Located at the top of the page, it displays the current operating mode ( RECORD , PLAY or STOP ) .
Timecode field
( Figure 2-2 { p.23 } displays 00:08:39:15 )
Located at the top of the page, it displays the current timecode based on the source selected in the Timecode
Setup page { p.28 }.
Headphone Monitor field
( Figure 2-2 { p.23 } displays HP 1 )
Prefader Listen field
Once the PFL key is pressed, the name in the Headphone Monitor field is replaced with PFL alternating with the
selected channel number(s) as follows:
Pressing the corresponding multi-function key will select the channel you are listening to. If you want to listen to
multiple channels at the same time just hold an additional multi-function key for approximately 1 second to add
that channel to the PFL circuit.
Press the HEADPHONE knob to restore normal headphone monitoring.
Mirror Status
( Figure 2-2 { p.23 } displays MIR 1 OF 20 )
Battery icon
( Figure 2-2 { p.23 } displays E inside of the Battery icon )
It indicates the power source ( I / E ), a numeric display of the current voltage and a color bar, indicating the state
of charge. Once the voltage reaches the level specified in the Warnings Setup page { p.51 }, the color of the
background changes to Red and optional beeps to the primary headphones are triggered.
Time Left ( TL ) display
( Figure 2-2 { p.23 } displays TL 01:02:03 )
This field indicates the recording time remaining on the Primary card, at the current track count and sampling-rate.