MAIN MENU ENG Setup / Advanced Setup
38
Output Levels
This menu allows you to adjust the output audio levels.
XLR & AUX (TA5) Output Bus Levels
Each of the XLR and Aux Outs can be independently adjusted to one of the following output levels:
•
0dBu
– line level
•
-10dBu
– tape / consumer level
•
-35dBu
– mic level
Mono & Tape Output Bus Levels
Independently adjusts the output level for Mono and Tape Outs, and each are continuously adjustable in 1 dB steps
from
–12dBu
to
21dBu
.
Play to Outputs
This sets if the playback audio will be sent to the output busses when playing back recorded audio.
•
OFF -
Playback audio will not be outputted to the output buses when playing back. Live audio will continue to be
sent to the outputs.
•
ON -
Playback audio will be outputted from the output busses when playing back. Live audio will be muted and
the playback audio only will be sent to the outputs.
Warnings Setup
This menu manages the audible alerts sent to the headphones. These warnings will also be displayed on the LCD
screen. Once one of the warning pages is being displayed on the LCD screen, pressing the
Headphone
knob will clear
the warning from the screen.
NOTE
: If no internal batteries are being used, it is recommended to turn off the internal battery warning option.
There is a separate user
adjustable voltage cutoff for both
internal and external battery.
Volume Level of warning beep
to the main headphones
If set to ON the record LED
will blink if Maxx is not
mirroring as it is recording to
the primary folder.
See
NOTE
below.