MAIN MENU ENG Setup / Advanced Setup
40
Advanced Setup Menu
Prevent Empty Pan
When set to
ON
, you remove the blank option while in ENG or AutoPan pan mode, leaving only the
L, C, R
option.
Display Speed button
This
should be set to
FAST.
Currently the display is updated every frame. If you are using a lot of effects and cross points and/or are running at
192 kHz and find that the user interface is getting hard to use. The
SLOW
setting will slow down the refresh rate.
The display will automatically go into
SLOW
when mirroring or when the unit needs more horsepower for recording.
Burn Boot loader
The boot loader is part of the software that helps boot up Maxx. Generally, you wouldn’t need to update this. If the
boot loader needs to be updated there will be a note released with the software to do so. The boot loader software is
already contained within Maxx’s software.’
Debug Bits
This is a factory diagnostic tool and the setting and should stay set to
0
.
Upgrade Code
This page is used to enter in a factory code to upgrade Maxx.
WARNING
:
Randomly entering in code numbers can cause your Maxx to lock up, permanently. It will need to
be sent in for service.
Allow Logging
If this is set to
ON
it allows Maxx to log warning and error messages as well as status. The logged messages are
displayed on the log screen.
Log Screen
This is where Maxx displays the logged errors and warnings. This is used to diagnose your Maxx.