Menu Contents
29
2
）
Press [MR] for 2 second ,LCD shows channel 01-100 flashes ,Press [UP]or [DOWN] to
select one channel from 01-100.
3
）
Press [MENU] again to store the frequency .
4
）
Still working under VFO mode ,and do again the above operations and type in other
frequency to store channels.
Note:
User can store 100 channels(maximum) when radio in the single Frequency .When turning
on dual band function ,user can store 50 channels (maximum) for each Frequency A and Frequency
B.
4.3 Switch Channel Mode
Press and hold[MR] to turn on the radio then switch to the channel mode. Do again ,change into
VFO mode.Channels in Channel Mode is stored under VFO mode or programmed by PC .Change
channels in Channel Mode by reset in VFO mode or re-programmed by PC.
4.4 1750 Tone
When user wants to use the radio with repeater ,the repeater can be turned on after receiving the
1750 signal.Meanwhile,press and hold[CALL]key for more than 1 second to keep transmitting 1750
signal.
▲
Radios turn on channel 01 or Current using channel.for transmitting(Setting by Menu 11)
▲
Indicators flashes red and sending the signal .
▲
1750 Tone can act as an emergency call.But user should adjust the volume to max,so that the
radio can issue an lounder emergency alarm.
Summary of Contents for ZT-V9
Page 40: ......
