Zastone ZT-V9, Manual

Page: 21 / 40

13 “PRI SET” 01-99 Channel Selection
14 “ANI CODE” Display Using Radio ID
15 “ANI SET” Edit ANI
3.Menu Instruction
Note:
The following features are set separately between Frequency Group A and B. That means ,it
is useful for Frequency Group A when operating tips display on the Group A .The same with
Group B .
3.1 RX QT Setting
If there is no special calling ,RX QT function makes radio quiet .Setting as following steps:
1) Press [MENU], [MENU] would display on the screen ,next line is blank .Then Press
[UP]or [DOWN] to select “RX QT”.
2) Press [MENU] enter into setting ,first line is “RX QT”,next line shows the status.
3) Press [#/MR] to select OFF/67.0HZ/D023N/D023I ,then press
[UP]or[DOWN] to set the
frequency for CTCSS /DCS.
4) Press [MENU] to confirm storing the settings and return ,or press [*/BAND] to exit and
back to standby ,but it can not store the settings.
3.2 TX QT Setting
Menu Contents
20