Menu Contents
28
1
）
Press [MENU],then press [UP]or [DOWN] to select “ANI SET”.
2
）
Press [MENU] enter setting ,first line is “ANI SET”,next line shows ANI code and the first
code flashes.
3
）
First digit is group number ,then press [UP]or [DOWN] to select 0-9.
4
）
After editing first digit ,then press [#] to editing second and third digit as ID .The number range
is 01-80 (For example ,ID is 01 ,second digit is 0 ,third digit is 1 ).
5
）
Press [MENU] to confirm storing the settings and return ,or press [*/BAND] to exit and back
to standby ,but it can not store the settings.
Note:
If want to delete or edit former digit ,press [#] till the digit which you want to modify flashes.That
means you can modify .
4.Auxiliary Functions
4.1 VFO
In VFO mode, press [UP]or [DOWN] to set the frequency stepcification or directly type in
frequency needed by keypad.
4.2 Channel Storing
★
Common Channel storing ,from 01-100 .
★
1 One special channel(Emergency channel) ,Number is 01.
Setting steps as following :
1
）
In VFO mode, choose needed frequency ,and set CTCSS and DCS simultaneously.
Summary of Contents for ZT-V9
Page 40: ......
