Zapi COMBI AC1, User Manual, Page: 60 / 86

Flow Chart showing how to use the PROGRAM VACC function of the Digital
Console.
Opening Zapi Display
CA1S2B ZAPI V0.0
24V 350A 00000
Press ENTER to go into the General menu
' % '
' ' '
The Display will show :
MAIN MENU
PARAMETER CHANGE
Press ROLL UP or ROLL DOWN button until
PROGRAM VACC the display
% ' '
% ' '
The Display will show :
MAIN MENU
PROGRAM VACC
Press ENTER to go into the PROGRAM VACC
function
' % '
' ' '
The Display will show the minimum and maximum
values of potentiometer wiper output.
Both directions can be shown
VACC SETTING
4.8 4.8
Press ENTER to clear these values.
Display will show 0.0
' % '
' ' '
Select Forward Direction, close any interlock
switches that may be in the system
MIN VACC MAX
0.0 - 0.0
Slowly depress the accelerator pedal (or tiller
butterfly) to its maximum value. The new minimum
and maximum voltages will be displayed on the
Console plus an arrow indicating the direction.
Select the Reverse Direction and repeat Item 10
MIN VACC MAX
0.6
↑
4.4
When finished , press OUT
' ' '
' % '
The Display will ask : ARE YOU SURE ?
ARE YOU SURE
YES=ENTER NO=OUT
Press ENTER for yes, or OUT for NO
' % '
' % '
When finished, the Console shows :
MAIN MENU
PROGRAM VACC
Press OUT to return to the Opening Zapi Display
' ' '
' % '
Page - 60/86 AEQZP0BA – COMBI AC1 - User Manual