Series 3 Technician’s Installation and Service Training Manual
82DTLM to Control Accessory ON/OFF Wiring Instruction
Series 3 Technician’s Inst
allati
on and Service Training Manual
82DTLM to Cont
rol Accessory
ON
/OFF Wiring Inst
ructio
n
Series 3
82
DTLM to Control
Accessory ON/OFF Wi
ring Instructi
on
ZAP Series 3
Simply Logical
ZAP Controls
100 Waterloo Blvd. Anglesey Business Park, Littleworth Road, Cannock, Staffordshire, England
UK Contact
011-44-154-387-9444
USA Contact
931-510-4432
USA Tech Support 931-510-4432
via telephone or text
Online
www.zap-uk.com
Warning Electrical
Shock Hazard
To prevent serious injury or death
always ensure power is disconnected
when wiring anything into the ZAP
Controller.
Isolate the power supply before wiring any device
into a ZAP Controller.
The 82–DTLM provides a series of relays that will
close a contact to send a signal to cause an
accessory to turn on in the following scenarios:
Upon the door entering it’s open cycle– Relay Close
(Red) When fully closed the relay is open,
Upon fully opening– Relay Close (I-lock)
When not fully open the relay is open
Upon fully closing– Relay Close (Green)
When not fully closed the relay is open
Relays are rated for voltages up to 250V and 6 amps.
Common
Interlock
Red
Green
42