Zanussi ZWC1301, User Manual

Page: 6 / 28

00000000
00A
Mod. xxxxxxxxx
000V ~ 00Hz 0000 W
910000000 00
A
B
C
Prod.No.
D
The rating plate reports the model name (A) , product
number (B), electrical ratings (C) and serial number (D).
TECHNICAL DATA
Dimension Width/ Height/ Total depth 50 cm /67 cm /55 cm
Electrical connection Voltage
Overall power
Fuse
Frequency
230-240 V
1600 W
13 A
50 Hz
Level of protection against ingress of solid particles and moisture
ensured by the protective cover, except where the low voltage
equipment has no protection against moisture
IPX4
Water supply pressure
1)
Minimum
Maximum
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Water supply
2)
Cold water
Maximum Load Cotton 3 kg
Spin Speed Maximum spin speed 1251 rpm
1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do-
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2) Connect the water inlet hose to a water tap with a 3/4'' thread.
INSTALLATION
WARNING! Refer to Safety chapters.
LIFTING THE MACHINE
Incorrect methods of lifting can damage the
appliance. Open the door and take hold of the top
inside of the door opening. You can also lift the
machine by gripping the rear overhang of the top.
WARNING! Never lift the machine by
gripping it’s control panel, door, or
detergent dispenser.
6